Schluter Systems Kerdi-Line Floor Drain (Channel Body) for Shower Instalation

• Low profile linear floor drain specifically designed for bonded waterproofing assemblies
• Stainless Steel channel body
• Features standard 2" (50 mm) no-hub outlet
• Kit includes body, support, no-hub coupling, 4 inside + 2 outside corners, pipe seal and valve seal
• Grate is SOLD SEPARATELY in a wide variety of finishes
  

Schluter-KERDI-LINE is a low profile linear floor drain specifically designed for bonded waterproofing assemblies. KERDI-LINE can be installed adjacent to walls or at intermediate locations. The floor can be sloped on a single plane to KERDI-LINE, which enables the use of largeformat tiles and creates interesting design opportunities. KERDI-LINE channel body features a standard 2" (50 mm) no-hub outlet and is attached to the pipe using an appropriate mechanical no-hub coupling. The simple connection to standard drain outlets makes KERDI-LINE suitable for new construction and renovation. KERDI-LINE is available with both center and off-set outlets. The offset outlet is located 8" (20.3 cm) from the edge of the channel body and provides flexibility when obstacles (e.g., floor joists) are encountered during installation. KERDI-LINE Channel Body kit includes a corresponding polystyrene foam channel support to set the drain elevation to the corresponding KERDI-SHOWER-LT/-LTS shower trays. The perimeter of the channel body consists of a bonding flange laminated with a collar made of KERDI. It ensures a simple and secure connection to the bonded waterproofing assembly, both in the floor area and on adjacent walls. KERDI-LINE is available in channel lengths from 20" to 72" (50 cm to 180 cm) in 4" (10 cm) increments. The bonding flange extends approximately 1" (2.5 cm) beyond the channel on all sides.

KL1V60E50
KL1V60E60
KL1V60E70
KL1VO60E70
KL1VO60E80
KL1V60E80
KL1V60E90
KL1VO60E90
KL1V60E100
KL1VO60E100
KL1V60E110
KL1VO60E110
KL1V60E120
KL1VO60E120
KL1V60E130
KL1V60E140
KL1V60E150
KL1V60E160
KL1V60E170
KL1V60E180